Master Chassis Hardware Kit 71 E Body HEMI with Disc Brakes (267pcs)

Description

Application: Fits: 1970 E-Body 426 w Disc

** contains the sub-kits listed below **

Application: ACCELERATOR PEDAL (B & E body) – Fastener Style CONI KEPS, CONI SEMS – Qty: 6

Application: AXLE HOUSING > SPRINGS – Fastener Style 1/2-20 x 7.12 U-BOLTS, LOCK NUTS – Qty: 12

Application: AXLE RETAINING NUTS – Fastener Style HX LOCK NUTS, FLNG NUTS – Qty: 10

Application: BALL JOINTS w DISC BRAKES – Fastener Style HX BOLTS, SLOTTED NUTS, PINS – Qty: 12

Application: BRAKE BOOSTER – Fastener Style HX LOCK NUTS – Qty: 4

Application: BRAKE CABLE TENSION ADJUSTER – Fastener Style FLANGE LOCK NUT ONLY – Qty: 1

Application: BRAKE CALIPER TUBE BRACKETS – Fastener Style HX CONI SEMS – Qty: 4

Application: BRAKE CALIPERS > SPINDLE – Fastener Style HX CONI SEMS – Qty: 4

Application: BRAKE DRUM RETAINERS – Fastener Style 1/2″ STUD, GREEN PUSH ON RETAINERS – Qty: 6

Application: BRAKE HOSES > BRACKET CLIPS – Fastener Style U-CLIPS – Qty: 3

Application: BRAKE ROTOR SHIELDS – Fastener Style HX CONI SEMS – Qty: 6

Application: CONTROL ARMS (UPR) – Fastener Style CAM BOLTS, WASHERS, NUTS – Qty: 16

Application: DIFFERENTIAL CARRIER – 8 3/4 – Fastener Style NUTS w NYLON PATCH – Qty: 10

Application: DIFFERENTIAL CARRIER COVER – 9 3/4 – Fastener Style 3/8″ HX FLNG BOLTS “E” – Qty: 10

Application: DRIVESHAFT > FLANGE – Fastener Style STRAPS, HX BOLTS, SPLIT WA’S – Qty: 10

Application: ENGINE INSULATOR > BODY – HEMI (E body) – Fastener Style HX BOLT “38”, CONI SEMS, KEPS & WA’S – Qty: 5

Application: ENGINE INSULATOR > ENG BRKT – 426 HEMI – Fastener Style 1/2-13 MARSDEN NUTS – Qty: 2

Application: ENGINE MOUNT BRACKETS – 426 HEMI – Fastener Style STUDS, NUTS, QUAD RIB SPLIT WA’S – Qty: 18

Application: GAS TANK – Fastener Style J-BOLTS, LOCK NUTS – Qty: 4

Application: IDLER ARM – Fastener Style “TR” HEX BOLT, TRI-SLOT NUT, PIN – Qty: 3

Application: K-FRAME > BODY – Fastener Style SPECIAL HEX CONI SEMS – Qty: 4

Application: LEAF SPRING MOUNTING @ FRONT – Fastener Style “H” MARKED BOLTS, MARSDEN NUTS – Qty: 4

Application: LEAF SPRING MOUNTING @ FRONT – Fastener Style HUB BOLTS, CONI KEPS – Qty: 16

Application: MASTER CYLINDER – Fastener Style HX LOCK NUTS – Qty: 4

Application: MASTER CYLINDER SUPPORT PLATE – Fastener Style CONI KEPS, EXT KEPS, SEALER – Qty: 4

Application: PARKING BRAKE CONTROL > BODY – Fastener Style HX CONI SEMS, CONI KEPS – Qty: 3

Application: PITMAN ARM – Fastener Style NUT, SPLIT WA – Qty: 2

Application: PROPORTIONING VALVE > APRON – Fastener Style RED FLANGE LOCK NUT – Qty: 1

Application: SHACKLES – NUTS ONLY – Fastener Style HX NUTS – Qty: 4

Application: SHOCKS (Fr) – LWR MOUNTING – Fastener Style 7/16 HX BOLTS “TR” or “D”, LOCK NUTS – Qty: 4

Application: SHOCKS (Rr) – LWR MOUNTING – Fastener Style HX NUTS ONLY – Qty: 2

Application: SHOCKS (Rr) – UPR MOUNTING – Fastener Style HX BOLTS, LOCK NUTS – Qty: 4

Application: STABILIZER BAR CENTER SUPPORTS (B & E body) – Fastener Style HX BOLTS “H”, CONI SEMS, LOCK NUTS – Qty: 16

Application: STEERING GEAR (B body) – Fastener Style HI-HX HD BOLTS, SPLIT WA’S – Qty: 6

Application: STEERING LINKAGE – Fastener Style TRI-SLOT NUTS, COTTER PINS – Qty: 12

Application: STRUT ROD > K-FRAME (B & E body) – Fastener Style 5/8-11 LOCK NUTS – Qty: 4

Application: SUSPENSION BUMPER BRKT > 9 3/4 AXLE – Fastener Style HX CONI SEMS “ANCHOR” – Qty: 3

Application: SUSPENSION BUMPERS (Fr) – Fastener Style HUG-LOK NUTS – Qty: 4

Application: SUSPENSION BUMPERS (Rr) – Fastener Style HX FLNG SCREWS – Qty: 4

Application: TRANS CROSSMEMBER – Fastener Style HX BOLTS, CONI KEPS, FLAT WA’S – Qty: 16

Application: TRANS INSULATOR > CROSSMEMBER – Fastener Style HX BOLT, FLAT WA, LOCK NUT – Qty: 3

Application: TRANS INSULATOR > TRANS – Fastener Style HX CONI SEMS, SQR WA’S – Qty: 4

Application: WHEEL CYLINDERS (2) w 1/4-20 – Fastener Style HX FLNG SCREWS – Qty: 4